Oil Change Kits from AMSOIL take the guesswork out of picking the best oil and filter combination for your vehicle.
Plus
Oil Grade: SEO84
| Viscosity: |
0W-40 (All TEMPS) - Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-40 oil meeting WSS-M2C171-F1.
10W-30 (Above -18°C) - Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-40 oil meeting WSS-M2C171-F1. 15W-40 (Above -7°C) - Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-40 oil meeting WSS-M2C171-F1. 5W-40 (Above -29°C) - Manufacturer recommends 10W-30 for normal usage and 5W-40 for severe operations. If biodiesel fuel blends (B20 max) are used the use of 5W-40 or 15W-40 oil is recommended. To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-40 oil meeting WSS-M2C171-F1. |
|---|---|
| Capacity: | 14.2 litres (with filter). After refill check oil level. |
| Torque: | 19 ft/lbs (Oil Drain Plug) |
1Based on third-party testing in the Detroit Diesel DD13 Scuffing Test for specification DFS 93K222 using 5W-30 as worst-case representation
Retail Price (CAD)
Retail Price (CAD)
No recommendations available
No recommendations available
| Capacity: | Primary CSYS30 litres. |
|---|---|
| Capacity: | Primary CSYS With AUX RAD31.5 litres. |
| Capacity: | Secondary CSYS9.5 litres. Urea Injector Cooling and Cooled Compressor. |
| Capacity: | Secondary CSYS7.8 litres. With Urea Injector Cooling |
Retail Price (CAD)
Retail Price (CAD)
For Automatic Transmission: 10R140....ULV
| Notes: | (1) The WSS-M2C949-A specification recommended was developed by Ford and GM. Products meeting the specification are available under the DEXRON ULV and MERCON ULV tradenames. |
|---|---|
| Capacity: | 10 speed 10R140 Total Fill 17.1 litres. |
| Capacity: | 5.6 litres Initial Fill. |
Retail Price (CAD)
No recommendations available
No recommendations available
No recommendations available
For Transfer Case: U/K TRC....MLV
| Capacity: | U/K TRC 1.8 litres. The transfer case fluid must be within 15mm (0.393in) below the fill plug hole. |
|---|---|
| Torque: | 20 ft/lbs (Transfer Case Fill Plug) Apply high performance thread sealant to the threads of the drain and fill plugs before installing. |
| Torque: | 20 ft/lbs (Transfer Case Drain Plug) Apply high performance thread sealant to the threads of the drain and fill plugs before installing. |
Retail Price (CAD)
Retail Price (CAD)
10.08 RG....GL-5 All TEMPS....80W-90
| Capacity: | 10.08 RG Front 2.6 litres. |
|---|
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
9.25 4WD W/O LSD....GL-5 All TEMPS....80W-90
| Capacity: | 9.25 4WD With O LSD Front 2.1 litres. |
|---|
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
Limited Slip Differential, 9.25 4WD W/ LSD....GL-5* All TEMPS....80W-90
| Notes: | (1) For complete refill of limited slip axles, add 4.4 oz (130ml) of additive friction modifier XL-3 or equivalent meeting Ford spec EST-M2C118-A. |
|---|---|
| Capacity: | 9.25 4WD With LSD Front 2.1 litres. |
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
10.5 RG W/ ELD....GL-5 All TEMPS....75W-85
| Notes: | (1) Synthetic oil is rquired. Manufacturer recommends the use of Motorcraft Premium Hypoid Gear lubricant, P/N XY-75W85-QL (WSS-M2C942-A). |
|---|---|
| Capacity: | 10.5 RG With ELD Rear 3.3 litres. Capacity varies from 3.3-3.5 quarts (3.1-3.3 Liters). |
Retail Price (CAD)
10.5 RG W/O ELD....GL-5 All TEMPS....75W-85
| Notes: | (1) Synthetic oil is rquired. Manufacturer recommends the use of Motorcraft Premium Hypoid Gear lubricant, P/N XY-75W85-QL (WSS-M2C942-A). |
|---|---|
| Capacity: | 10.5 RG With O ELD Rear 3.4 litres. Capacity varies from 3.5-3.6 quarts (3.3-3.4 Liters). |
Retail Price (CAD)
10.8 RG W/O LSD....GL-5 All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 10.8 RG With O LSD Rear 3.5 litres. |
Retail Price (CAD)
11.6 RG....GL-5 All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 11.6 RG Rear 4.2 litres. All other final Drive ratios (3.31/3.55/3.73). |
Retail Price (CAD)
11.6 RG 4.3 FINDR....GL-5 All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 11.6 RG 4.3 FINDR Rear 4.3 litres. |
Retail Price (CAD)
11.8 RG ELD W/ SRW....GL-5 All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 11.8 RG ELD With SRW Rear 3.8 litres. |
Retail Price (CAD)
11.8 RG W/O LSD....GL-5 All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 11.8 RG With O LSD Rear 4 litres. |
Retail Price (CAD)
Limited Slip Differential, 10.8 RG W/ LSD....GL-5* All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 10.8 RG With LSD Rear 3.3 litres. |
Retail Price (CAD)
Limited Slip Differential, 11.8 RG W/ LSD....GL-5* All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 11.8 RG With LSD Rear 3.7 litres. |
Retail Price (CAD)
Limited Slip Differential, 12.4 RG W/ LSD....GL-5* All TEMPS....75W-140
| Notes: | (1) Use SAE 75W-140 synthetic rear axle lubricant. Motorcraft P/N XY-75W140-QL; Ford specification WSL-M2C192-A |
|---|---|
| Capacity: | 12.4 RG With LSD Rear 4.4 litres. |
Retail Price (CAD)
Recommended For: HBH
No recommendations available
| Notes: | (1) Motorcraft DOT 4 LV High Performance Brake Fluid P/N PM-20 or equivalent meeting WSS-M6C65-A2 or ISO 4925 class 6. |
|---|
No recommendations available
No recommendations available
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
Retail Price (CAD)
AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2026 Ford F250 HD PICKUP. How good are they? Our synthetic motor oils blow the doors off the highest industry standards.
Protect your Ford F250 HD PICKUP in any driving condition with our specially formulated motor oils. Whether it’s extreme temperatures, long commutes, towing, hauling, the added stress of a turbocharger or you’re simply extending the time between oil changes, our motor oils will keep your 2026 Ford F250 HD PICKUP protected.
We produce the synthetic motor oil, oil filter, transmission fluid, gear lube and grease for a complete fluid change – everything to keep your Ford F250 HD PICKUP running smoothly for the long haul.
AMSOIL products are subjected to rigorous third-party, industry-standard testing so you can rest assured you’re getting maximum protection. Also, check out our customer reviews on amsoil.com to make the best choice for your Ford F250 HD PICKUP. Hear from more than 6,000 customers who have experienced AMSOIL lubricants.
Using a properly formulated transmission fluid for your Ford F250 HD PICKUP can protect your vehicle from costly problems down the road. AMSOIL transmission fluids offer the best protection for your Ford F250 HD PICKUP, even in the most severe driving conditions. Protect your vehicle’s transmission from wear, sludge and temperature-related problems and drive with confidence.
Shop online and get your products in 3 business days or less. With free shipping on orders over $130, and an average 25% savings for Preferred Customers, shopping online is the fastest way to get AMSOIL products to your doorstep. Becoming a Preferred Customer earns you savings, points on purchases and more. Simply shop amsoil.com and add a P.C. membership to your cart before checking out. You will receive an immediate savings on products for your 2026 Ford F250 HD PICKUP.
Getting products for your 2026 Ford F250 HD PICKUP couldn’t be easier. Find a nearby Independent AMSOIL Dealer or retailer using the AMSOIL Locator.
Specifications contained on this website are based on manufacturers' information and were believed accurate at the time of publication. Our recommendations apply to AMSOIL products only, as we cannot be responsible for products from other manufacturers. Always compare fluids and lubricants that were installed in the vehicle with those replacing them during service. Never install more fluid or lubricant than what is considered adequate according to gradients on dipstick or level of filler hole. Fill and drain locations are for reference only. Failure to perform adequate inspections or obtain proper resolution will limit or negate any liability toward AMSOIL INC. Models introduced midyear may not have the same specifications as those produced earlier.
If any discrepancies are noted, they can be simply reported to AMSOIL by clicking on the "Problem?" link docked to the left. We review all reported problems, if you would like a personal response to the issue you are reporting please enter your email address in the space provided on the form.